Dual-Synchronized Airtight Seal: Houses two perfectly aligned, high-elasticity rubber cap tops on a unified tracking base, ensuring uniform upward sealing pressure across both printheads.

Superior Chemical Resilience: Constructed from premium engineering plastics and specialized silicone gaskets designed to withstand aggressive UV-curable monomers, harsh eco-solvent flushes, and heavily-pigmented DTF white inks without swelling or melting.

Flawless Parallel Dual Alignment: Specifically designed to isolate and anchor two identical industrial printheads perfectly parallel to each other, optimizing synchronized CMYK, White, or Varnish ink configurations.

Lightweight Aviation Aluminum: Constructed from premium aircraft-grade aluminum alloy to maximize physical rigidity and minimize overall carriage weight, reducing stress on your carriage drive belts and stepper motors.

Quad-Synchronized Airtight Gaskets: Integrates four perfectly leveled, high-elasticity silicone cap tops on a single heavy-duty tracking bracket to ensure uniform upward sealing pressure against all four printheads.

Maximum Chemical & Solvent Resistance: Injection-molded from premium engineering polymers that strictly resist swelling, cracking, or turning gummy when exposed to aggressive UV-curable inks, strong eco-solvent flushes, or thick, fast-settling DTF white ink pigments.

High-Vacuum Quad-Drain Design: Features independent, micro-porous absorption cores inside each cap top to safely isolate waste inks, routing fluids directly into the pump line without messy fluid backflow or cross-bleeding.

Ultra-Precise CNC Milling: Machined to micrometer-level flatness tolerances, ensuring all four printhead nozzle plates sit perfectly flush and parallel against the media bed.

Flawless Multi-Head Synchronization: Explicitly designed to anchor four identical industrial printheads, optimizing high-density color overlays, rich white ink bases, and high-gloss varnish layouts.

Lightweight Aviation Aluminum: Constructed from premium aircraft-grade aluminum alloy to maximize rigidity while minimizing carriage weight, reducing mechanical strain on your carriage drive belts and stepper motors.

Pre-Drilled Factory Calibrated Mounts: Features precision-tapped screw holes and exact locating guides, making printhead installation straightforward and significantly reducing manual alignment setup times.

8-Zone Synchronized Airtight Gaskets: Integrates eight perfectly leveled, high-elasticity silicone cap tops on a single heavy-duty mechanical frame, ensuring uniform upward sealing pressure against all eight printheads simultaneously.

Maximum Chemical & Solvent Resistance: Injection-molded from premium engineering polymers that strictly resist swelling, cracking, or turning gummy when exposed to aggressive UV-curable inks, strong eco-solvent flushes, or thick, fast-settling DTF white ink pigments.

High-Vacuum Octal-Drain Design: Features independent, micro-porous absorption cores inside each individual cap top to safely isolate waste inks, routing fluids directly into the waste lines without messy fluid backflow or cross-bleeding.

Ultra-Precise CNC Milling: Machined to micrometer-level flatness tolerances, ensuring all eight printhead nozzle plates sit perfectly flush and parallel against the media bed.

Flawless Multi-Head Synchronization: Explicitly designed to anchor eight identical industrial printheads, optimizing high-density multi-color overlays, rich white ink bases, and high-gloss varnish layouts.

Lightweight Aviation Aluminum: Constructed from premium aircraft-grade aluminum alloy to maximize physical rigidity while minimizing overall carriage weight, reducing mechanical strain on your carriage drive belts and stepper motors.

Flawless DX5 Form-Fit Seal: Precision-molded to trace the exact perimeter of the Epson DX5 nozzle face, ensuring uniform rubber-to-metal contact with zero air leakage.

Premium Solvent-Resistant Elastomer: Formulated from high-elasticity silicone that resists degradation, swelling, or hardening when exposed to harsh eco-solvent, traditional solvent, UV-curable, or water-based sublimation inks.

Flawless DX7 Form-Fit Seal: Precision-molded to trace the exact perimeter of the Epson DX7 nozzle face, ensuring uniform rubber-to-metal contact with zero air leakage.

Premium Solvent-Resistant Elastomer: Formulated from a high-elasticity compound designed to withstand prolonged exposure to aggressive UV-curable monomers, harsh eco-solvent flushes, and water-based sublimation inks without warping or swelling.

High-Flow Micro-Porous Sponge: Features an integrated, lint-free ink-absorbing core that draws waste fluids away instantly, preventing dirty ink from pooling and cross-contaminating your nozzle channels.

Precision Type A Layout Alignment: Molded with specific structural tabs, guides, and connection paths to provide a direct slide-in fit for Type-A configured maintenance decks and single or multi-head tracking bases.

Flawless 4-Row Nozzle Form-Fit: Perfectly mirrors the exact perimeter layout of the Epson 5113 printhead face, ensuring uniform, airtight rubber-to-metal contact with zero vacuum loss.

Industrial Corrosion-Resistant Elastomer: Built from a premium, high-elasticity rubber compound designed to withstand prolonged exposure to aggressive sublimation, water-based textile, DTF, and eco-solvent inks without warping or swelling.

Flawless DX4 Form-Fit Seal: Precision-molded to trace the exact dual-channel perimeter of the Epson DX4 nozzle face, ensuring uniform rubber-to-metal contact with zero vacuum loss.

Premium Solvent-Resistant Elastomer: Formulated from high-elasticity silicone that resists degradation, swelling, or hardening when exposed to harsh eco-solvent, traditional solvent, UV-curable, or water-based sublimation inks.

High-Flow Micro-Porous Sponge: Features an integrated, lint-free ink-absorbing core that draws waste fluids away instantly, preventing dirty ink from pooling and cross-contaminating your nozzle channels.

Flawless DX5 Form-Fit Seal: Precision-molded to trace the exact 8-row perimeter of the Epson DX5 nozzle face, ensuring uniform rubber-to-metal contact with zero air leakage.

Side A Bracket Configuration: Mapped explicitly with the correct positioning tabs, guide rails, and fluid drainage path required for the primary (Side A / Track 1) position of multi-head maintenance decks.

Premium Solvent-Resistant Polymer: Constructed from high-elasticity silicone and premium ABS plastics that resist degradation, swelling, or hardening when exposed to harsh eco-solvent flushes, UV monomers, and thick DTF white ink pigments.

Enlarged High-Volume Chamber: Built with a deeper internal reservoir and wider fluid outlets to process massive ink purges efficiently without overflowing or back-flooding the nozzle plate.

Flawless DX5 Form-Fit Seal: Precision-molded to trace the exact perimeter of the Epson DX5 nozzle face, ensuring uniform rubber-to-metal contact with zero vacuum loss.

Premium Solvent-Resistant Material: Formulated with a high-elasticity rubber seal that strictly resists swelling, tearing, or turning gummy when exposed to harsh eco-solvent flushes and traditional solvent inks.

High-Capacity Micro-Porous Sponge: Features a lint-free absorption core designed to instantly wick away residual ink mist, preventing dirty fluids from pooling and wicking backward into your color channels.

High-Flow Anti-Overflow Chamber: Built with a deep internal reservoir and optimized drainage paths to quickly siphon away heavy ink volumes during high-pressure pump purges without back-flooding your color channels.

Lint-Free Core Sponge: Equipped with a high-density porous absorption core that traps waste fluids instantly while remaining completely free of stray fibers that could scratch or snag the nozzle plate.

Flawless Form-Fit Rim Seal: Precision-molded to trace the exact perimeter of the printhead nozzle face, creating a uniform, airtight gasket contact that locks out dry air completely.

Superior Chemical Resistance: Built using premium, high-elasticity polymers designed to withstand prolonged exposure to aggressive UV-curable monomers, harsh eco-solvents, or thick, heavily-pigmented DTF white inks without warping or swelling.

Side A Correct Alignment: Mapped explicitly with the correct positioning brackets, guide rails, and bottom layout required for the primary (Side A) track of multi-head maintenance decks.

Precision Side B Alignment Design: Mapped explicitly with the correct tracking brackets, positioning tabs, and fluid drainage path required for the secondary (Side B / Track 2) position of multi-head maintenance decks.

Flawless Form-Fit Rim Seal: Precision-molded to trace the exact perimeter of the printhead nozzle face, ensuring uniform rubber-to-metal contact with zero vacuum loss.

Flawless TX800 Form-Fit Seal: Precision-molded to trace the exact perimeter of the Epson TX800 nozzle face, ensuring uniform rubber-to-metal contact with zero vacuum loss.

Superior Chemical & Solvent Resilience: Injection-molded from premium engineering polymers and high-flex silicone that strictly resist swelling, cracking, or turning gummy when exposed to harsh eco-solvent flushes, UV-curable inks, and heavily-pigmented DTF fluids.

High-Flow Anti-Overflow Chamber: Built with an integrated, lint-free porous absorption core that traps and siphons away waste ink instantly, preventing dirty fluid from pooling and wicking backward into adjacent color channels.

Flawless XP600 Form-Fit Seal: Precision-molded to trace the exact perimeter of the Epson XP600 nozzle face, ensuring uniform rubber-to-metal contact with zero vacuum loss.

Superior Chemical & Solvent Resilience: Injection-molded from premium engineering polymers and high-flex silicone that strictly resist swelling, cracking, or turning gummy when exposed to harsh eco-solvent flushes, UV-curable inks, and heavily-pigmented DTF fluids.